CAB - Windows printer driver

Driver version 4.6.44.2498

Updates:

• Batch cut with variable data and/or true type counters now works correctly

Driver version 4.6.43.2445

What's new:

• User is now able to change administrator settings without reopening driver properties dialog as an elevated user. A click on the shielded button and entering the credentials is all that is needed.

Driver version 4.6.41.2364

Updates:

• Fixed occasional driver crash when printing extremely large graphics

Driver version 4.6.41.2361

What's new:

• Page preview icons in "Advanced Dialog" corrected.
  

Driver version 4.6.38

Updates:

• When user without Administrative premissions was trying to use PrnInst, it just stalled.

Driver version 4.6.37

Updates:

• Uninstall of printer with Printer Install Wizard did not work on Windows 2003 (x64) system

Driver version 4.6.34.2269

Updates:

• Time format hh:mm:ss is not supported.

Driver version 4.6.30.2157

Updates:

• Media Type selection enabled on printers without display and disabled on printers with display.
  

Driver version 4.6.22

What's new:

• Build number is now part of version information in About dialog

Driver version 4.6.18

Updates:

• Added ability to enter negative "Top to bottom offset" for XD4 models.

Driver version 4.6.15

Updates:

• Added options to turn off print optimization on printers using CAB printer language

Driver version 4.6.14

What's new:

• DPL printers have ability to print inverse text. This option is supported now also in NiceDrivers.

Updates:

• Macros 05 and 06 on Datamatrix are now supported on printer models with ZPL and DPL printer language.
• For some commands Orientation parameter (landscape/portrait) was ignored and this should not happen, because width and height are related with orientation setting. This is corrected now and correct dimmensions are sent to the printer.
• DPL printer will print unlimited labels quantity with quantity command  of 9999.

Driver version 4.6.13

What's new:

• Added new date/time options when using printer clock on CAB printers.

Driver version 4.6.11

Updates:

• Corrected printing of SSCC-18 barcode with variable data

Driver version 4.6.09

Updates:

• French translation have been updated for CAB driver language and also for some general driver dialogs.

Driver version 4.6.08

What's new:

• Following printers added: A2+ 300DPI K, A4+ 200DPI K, A4+ 300DPI K, A4+ 600DPI K, PX4/L 200DPI, PX4/R 200DPI, PX4/L 300DPI, PX4/R 300DPI, PX4/L 600DPI, PX4/R 600DPI, PX6/L 300DPI, PX6/R 300DPI, Hermes A2/L 300DPI, Hermes A2/R 300DPI, Hermes A2/L 600DPI and Hermes A2/R 600DPI.
  E4 200dpi and E4 300dpi were changed to E4 200DPI and E4 300DPI.

Driver version 4.6.04

Updates:

• WYSIWYG for internal fonts is corrected for DPL printers.

Driver version 4.6.01

Updates:

• Postnet barcodes has wrong expansions and are printed too big. This is corrected now and WYSIWYG is OK.
• Added Rotation to parsed text in command fonts
• When continuos paper is used command Q0001,0 is not correct. It should be Q{page_height},0.

Driver version 4.6.00

Updates:

• Printing process was stopped during heavy duty printing.
• Barcode height is corrected for non-203 dpi printers.

Driver version 4.5.42

What's new:

• Driver print speed optimization

Driver version 4.5.40

Updates:

• Database fed empty elements from Labeling software are now printed correctly
• Offsets on CAB printers for perforation before/after label and cutting before label now allow negative values (-9.9mm - 9.9mm)

Driver version 4.5.39

What's new:

• XD Printer models can no longer change "Forced optimization" and "Ignore position" settings

Updates:

• PrnInst showed login window, even if the user running the application was administrator.

Driver version 4.5.38

What's new:

• Following models added to distribution: E4 200dpi and E4 300dpi.

Updates:

• Added correct PnP IDs for A4+M printer models

Driver version 4.5.37

Updates:

• PrnInst can now be moved to any position (second monitor) and it will stay there. It will not jump back to its original position.

Driver version 4.5.34

Updates:

• Postnet barcode fonts can no longer have their width changed.

Driver version 4.5.14

Updates:

• Fixed issue with forced optimization in non labeling software.
• Fixed issue with barcode fonts causing protocol error
• Added explanation for "Forced optimized printing" option

Driver version 4.5.13

What's new:

• Internal elements now get filtered out when not using labeling software and forcing optimization

Updates:

• Fixed issue with printing from word using forced optimization

Driver version 4.5.12

Updates:

• User can select Automatic or Manual options for Job removing using keyboard in Printer Install Wizard
• Fixed labeling software crash when turning off "Use Advanced printer driver interface".

Driver version 4.5.11

What's new:

• Added A2+ 600 dpi printer model

Updates:

• Fixed command sequence for export to printer

• Printer Install Wizard uninstallation of driver doesn`t remove all of the files from the SYSTEM32\spool\drivers\w32x86\3\ folder.
• Corrected PnP ID for A4 600 dpi printer model

Driver version 4.5.09

Updates:

• Electonic Article Survailance was always disabled on Rfid printers
• Fixed printing of Datamatrix and QR barcode font with more then 255 character data
• Added automatic termination character for Maxicode barcode font data

Driver version 4.5.07

What's new:

• Added support for custom printer name after silently installing a printer driver from command line (/INSTPRN; /INSTMULTPRN)

Driver version 4.5.06

What's new:

• Printer Installation Wizard will be able to automaticly remove all jobs when updating printer

Driver version 4.5.05

What's new:

• Printer Install Wizard can start an application specified in the command line, after it closes.

Driver version 4.5.04

Updates:

• Fixed Advanced TCP/IP port to handle leading 0 in IP.

Driver version 4.5.03

What's new:

• Status monitor is able to detect port conflicts, when two printer drivers are using the same port for bidirectional communication with the printer.
  Also when user will delete or install a new printer to the system, Status Monitor will detect the change by itself.

Updates:

• When you disable the option "Use advanced printer driver interface" (in File -> Label Setup -> Printing tab) labeling software will crash with the error "GDI Failure, OK to continue?"

Driver version 4.5.02

Updates:

• PrnInst didn't set printer attributes correctly. This is fixed now.

Driver version 4.5.01

What's new:

• Turkish language added

Updates:

• Moved perforation commands in stream to avoid protocol errors

Driver version 4.5.00

What's new:

•  - write MMF to alternative location (research)
   - update MemMaster to store files to this location
   - update driver to read from new location (make sure that the update will be backward compatible)

• New setting Printer default. If set, then printer will not send some settings from Options and Advanced Setup tab. This feature is useful for printers with LCD display where user would like to set printer parameters (speed, darkness...) manually.

• Added possibility of optimized printing of graphics from all windows software

Updates:

• Fixed printer error when printing different pages from windows software
• Added 50mm/s speed option to  A2+/300

Driver version 4.4.73

Updates:

• Uninstall of driver package failed when running a 64bti system.

Driver version 4.4.71

What's new:

• Driver now sends driver settings only at the start of the print
  

Driver version 4.4.69

What's new:

• Checkbox "Enable bidirectional support" (Printer properties -> Ports) can now be unchecked automatically during driver installation, corresponding to the flag "Bidirectional" in .inf file.
  Bidirectional=0  =>  checkbox is unchecked.
  Bidirectional=1  =>  checkbox is checked.
  If this information is ommited, Bidirectional=1 is assumed.

Updates:

• Labelling software can now recall variables with more than 31 characters of data.

• When you click on the Help button in About dialog help is opened, but it is not linked to any page.

• Help on About dialog opens help page with contents 'This program cannot display the webpage'.

Driver version 4.4.68

What's new:

• Optimized driver printing

Driver version 4.4.67

Updates:

• Fixed IMG compression for wide graphics

Driver version 4.4.65

Updates:

• Export label to printer works now correctly also for prompted variables,

Driver version 4.4.64

Updates:

• Removed Help button as no help is available.

• Export to printer didn't work properly. There was a wrong slot number in the exported print stream.
• New Japanese translation for Printer Install Wizard

Driver version 4.4.63

What's new:

• New Printers added: MACH4 300DPI K, D4+ 300DPI, AM4+ 300DPI,  AM4+ 600DPI
  

Updates:

• Downloaded fonts allways print in the same size, even if you resize them.
• DL of graphics on LPT port doesnt work correctly, when printing you get an empty screen
• When user starts Printer Install Wizard the application is shown but without focus

• Changed default number for cutting to 1 label instead of 0.

Driver version 4.4.62

What's new:

• Added new cutter commands to support new PCU4 cutter unit.
• Added new options to some printers: ingnore label position, ignore paper end, top side same as bottom, single buffer mode, top to bottom offset
  

Updates:

• Command "c" (immediate cut) is not recomended and therefore it is disabled.

Driver version 4.4.60

What's new:

• Changed file info for Printer Install Wizard

Updates:

• Default value for Always use default settings is not correct when instaling it the driver with a configuration file attached.

Driver version 4.4.52

What's new:

• DLL files for user interface translation did not include version info data.

Updates:

• Labels transfered from different systems now retain their driver settings.

Driver version 4.4.51

Updates:

• Increased lenght for filename and path in import and export of settings.
• POSTNET barcodes have a fixed height and width, but the interface allows the user to change these dimensions. 

Driver version 4.4.50

Updates:

• Import and export didn't work if filename and path exceeded the length of 80 characters while windows support 256 character lengths
  
• Click on "Stocks" panel caused error if stock list was empty. This is fixed now.

Driver version 4.4.30

What's new:

• - support for preinstall on all supported platforms

Driver version 4.4.01

Updates:

• EndDocument escape was sent even when there was no StartDocument.
• If driver gets no separator character description for decimal number from the OS, driver puts a "+" or "," string as default character. The result was seen for page size (example)
  Now the dot character "." is set for default separator in this case.
  

Driver version 4.4.00

What's new:

• Invalid stocks are now marked. User can open the Stock properties dialog and press OK to fix the problem (which is usually stock dimension). Stock size will be automatically adjusted.

Updates:

• UI for commands fonts works now properly also in Japanese language.
• Corredted handling of web printing for Gemini printer models
• Store/recall printing is not working on PPLA printers
• Printer falls into error when something is printed to it.
• In some rare cases streams sent to the printer had an extra "0" added in it.

Driver version 4.3.72

Updates:

• Sometimes a print stream is not send to the printer, and it stays stuck in the spooler

Driver version 4.3.70

Updates:

• Media type selection (direct thermal, thermal transfer) is added into Datamax advanced setup dialog. User will find this option in secondary dialog which can be opened by button "Other".

Driver version 4.3.63

Updates:

• Port monitor crashed when setting up port details (IP and port number)

Driver version 4.3.60

Updates:

• Barcode fonts vanished instead of being imported.

Driver version 4.3.59

Updates:

• Microsoft Vista operating system is not mentioned in the text file that is distributed with the driver.
• Stocks were not imported if user didn't view the stocks dialog beforehand

Driver version 4.3.56

Updates:

• Barcode ratio values are not shown in Barcode Fonts dialog. This only happens when you are editing existing barcode font.

Driver version 4.3.55

Updates:

• Spooler crashed during the installation, if there were any printers allready installed on the system.

Driver version 4.3.54

Updates:

• While installing a printer driver on certain systems the spooler crashed.
• "delete" button was enabled even if the barcode/command fonts list was empty. This is fixed now.
• Export of barcode fonts didn't work properly unless user clicked on barcode fonts tab before exporting them. This is fixed now.
• Increased timeouts for better printer status response times
• Slow printing occurred when a Not Accessible printer was found on a network. Printer status was also not received immediately.

Driver version 4.3.53

Updates:

• Status for printers (that use bidirectionaal communication) was not correct when the printer was not physicaly connected to the computer. Status was changing between Not Accessible and Ready

Driver version 4.3.51

What's new:

• Driver can now override the default document settings of some applications with driver default settings (set up in printer spooler)

Driver version 4.3.07

Updates:

• After viewing the Help file CHM file was locked and because of that reboot was needed to complete the installation. New version of driver will not lock the CHM any more and because of that reboot is not needed.

Driver version 4.3.06

What's new:

• Barcode fonts and command fonts are now stored in registry.

Updates:

• Printing did not work on nonbidirectional printers. Printer Error was displayed the whole time

Driver version 4.3.05

Updates:

• Printing did not work when bidirectional was enabled

Driver version 4.3.04

What's new:

• New Port monitor is added to the distribution
• On Windows Vista there is warning displayed if user doesn't have appropriate permissions to create (or write to) certain driver files.
• Old HLP help file format was exchanged for new CHM file format.

Updates:

• When user changed printer's port, the printing was no longer possible until reboot.
• Port monitor now uses correct (64 bit) interface file on 64bit systems.
• Installation did not go through when upgrading from old printer driver, if the user had the driver connected to the Advanced Port Monitor (LAN)
• Bug fixed, where some changes on stocks updated default umprintable area values.

Driver version 4.3.03

Updates:

• Spooler crashed, if user had multiple bidirectional printers using the same port, while using a status monitoring application

Driver version 4.3.02

Updates:

• Stocks were not imported properly or were not shown immediately after import.

Driver version 4.3.01

What's new:

• Korean language added.

Updates:

• Max. print height correction is made for:
  A4+ 600 dpi
  Mach4 600 dpi
  Hermes A4 600 dpi
  Hermes A5 600 dpi
  USB PnP ID is added for A8+ 300dpi model.
• Driver does not show all stocks in 'Stocks' combo box on 'Options' dialog. Missing stocks have heights that are near the maximum printer's limit.

Driver version 4.3.00

Updates:

• Changed window handling so that port monitor setup windows can appear on Vista

Click here to download NiceDriver!